Every scale works the same way
Rulers, weighing scales, measuring jugs, thermometers and speedometers all have numbered lines with unnumbered lines in between. The unnumbered ones are hardly ever worth 1.
Three steps, every time:
- Find two numbered lines next to each other, and work out the difference between them.
- Count the gaps between those two numbers. Count the spaces, not the lines.
- Divide. Difference ÷ gaps = what one gap is worth. Now count on from the nearest number below your mark.
A worked example
On a measuring jug, 0 and 500 ml are marked, with 5 gaps between them. The water is 3 gaps above 0. How much is in the jug?
- The difference is 500 − 0 = 500.
- There are 5 gaps.
- One gap is 500 ÷ 5 = 100 ml.
- The water is 3 gaps up: 3 × 100 = 300 ml.
Why counting lines goes wrong
Between 0 and 500 with 5 gaps there are only 4 lines in the middle. If you count lines instead of gaps you divide by 4 and get 125, and every reading after that is wrong.
Top tip: put your finger on the first numbered line and count the jumps as you move to the next numbered line. Jumps are gaps.
Scales that do not start at zero
A scale is marked 200 and 300, with 4 gaps between them. What is the mark 3 gaps above 200?
One gap is 100 ÷ 4 = 25, so three gaps is 75, and the mark is 200 + 75 = 275.
Always count on from the number below, not from zero. The scale may not go near zero at all.
| Numbered lines | Gaps between | One gap is worth |
|---|---|---|
| 0 and 50 | 5 | 10 |
| 0 and 1 | 10 | 0.1 |
| 200 and 300 | 4 | 25 |
| 0 and 500 | 5 | 100 |
Watch out! Below zero the scale keeps counting away from zero as it goes down: 0, −2, −4. The numbers get bigger and the reading gets smaller. That is how a cold temperature is read.
Watch out! Check the unit printed on the scale before you answer. The same mark is 300 on a jug in millilitres and 0.3 on one in litres.
Map scales
A map has a scale too, and it does the same job: it says what one unit on the paper is worth in real life.
1 cm represents 5 km
| What you want | Do this | Example |
|---|---|---|
| the real distance | map distance × the scale | 7 cm → 7 × 5 = 35 km |
| the map distance | real distance ÷ the scale | 45 km → 45 ÷ 5 = 9 cm |
Multiply to go out into the world, divide to come back onto the paper. If your answer for a real distance is smaller than the measurement on the map, you have done it the wrong way round.
Scales written as a ratio
Sometimes the scale is written 1 : 50 000 instead, which means one of anything on the map is 50 000 of the same thing in real life. Turn it into something useful by converting:
| Ratio | 1 cm on the map is | Which is |
|---|---|---|
| 1 : 25 000 | 25 000 cm | 250 m |
| 1 : 50 000 | 50 000 cm | 500 m |
| 1 : 100 000 | 100 000 cm | 1 km |
Remember 100 cm in a metre and 1000 m in a kilometre, and all three come out in two steps: 50 000 ÷ 100 = 500 m.
Watch out! Measure the map distance with a ruler in centimetres before you multiply, and give the answer in the unit the question asks for. A road 7 cm long at 1 cm = 5 km is 35 km, not 35 cm and not 35 m.
Top tip: write the scale at the top of your working as a little sum — 1 cm = 5 km — and every question on that map becomes one multiply or one divide.
🥛